added/replace new pictures where found less resolution.

*

Issue-Ref: 4006
Issue-Url: https://af3-developer.fortiss.org/issues/4006



Signed-off-by: saadbinabid1 <abid@fortiss.org>

org.fortiss.af3.rcp.help/html/ModandSim/component_architecture.html

@@ -79,7 +79,7 @@ To remove a bend point, right-click on it while pressing the <b>&lt;ctrl&gt;-key
 In the <i>Properties View</i>, you can edit the names of selected components, channels and ports. You can also specify comments.
 
 <br><br>
-<img src="./pictures/components_properties.png">
+<img src="./pictures/components_properties.png" height="500" width="900">
 <br><br>
 
 <h4><font color="#336699">Causality</font></h4>
@@ -151,7 +151,7 @@ Instead of doing the same at the other Port again, you should use the <i>backwar
 <i>Backward</i> copies the Port-Settings to all Ports connected by an incoming channel.<br>
 
 <br><br>
-<img src="./pictures/components_propagation.png">
+<img src="./pictures/components_propagation.png" height="400" width="950">
 <br><br>
 
 In the shown example the settings of the selected Output-Port are propagated to the connected Input-Port. Also the channel is renamed by this.
@@ -194,7 +194,7 @@ Ports attached to components can be manually moved by
 Rolling the mouse wheel while hovering over the component architecture editor and holding the <b>&lt;ctrl&gt;-key</b> zooms in or out, allowing the inspection parts of the model in detail or providing an overview over large models.
 <br><br>
 
-<img src="./pictures/components_zoom.png">
+<img src="./pictures/components_zoom.png" height="350" width="1050">
 
 <h4><font color="#336699">Auto-Layout</font></h4>
 
@@ -207,7 +207,7 @@ A component architecture can be automatically organized using the <i>Auto-Layout
 The components of the architecture are then automatically reorganized like so:
 <br><br>
 
-<img src="./pictures/components_auto-layout_architecture.png">
+<img src="./pictures/components_auto-layout_architecture.png" height="350" width="1150">
 
 </body>
 </html>
\ No newline at end of file

org.fortiss.af3.rcp.help/html/ModandSim/model_markers_view.html

@@ -30,7 +30,7 @@ Examples of such checks are extremely diversified in AutoFOCUS:
 
 When a check fails, an "alarm" icon is shown on the corresponding model element in the model navigator and in the editor(s) displaying this element.
 <br><br>
-<img src="./pictures/failedConstraint.png" style="height:50%;">
+<img src="./pictures/failedConstraint.png" style="height:100%;">
 <br><br>
 For some checks which are considered of less importance a yellow warning sign is shown instead of a cross:
 <br><br>